Saturday, July 24, 2010

Popsicle Soap Tutorial

hi...this is carrie from greenbeans craftterole!....and i'm super exctied to be over here at sister's stuff!...thanks for having me!...and i hope you enjoy these little soaps that i whipped up!...

so...i was figuring that it's never too early to start washing your kids mouth out with soap...and now that can be done with these soapsicles!...lol...i'm thinking i'm not going to be asked to babysit anytime soon!...hee hee...anywho...thought i'd do up a tutorial on how to make these yummy tasting smelling soaps....


you'll need....a popsicle mold...this one's from go planet earth...but you can certainly use whatever mold you want...small soap bags...also from go planet earth...popsicle sticks...and large binder clips....


also...grab some clear melt and pour soap...glass measuring cup...soap colorant...i prefer liquid over the powder or gel...fragrance oils...and rubbing alcohol in a spritzer bottle...


take your soap and cut up into chunks...and put in glass measuring cup...it takes about 2 1/4 ounces for one soapsicle...now that's solid weight...not liquid...


head on over to the microwave...you'll want to do 1 minute at 50% power...then...until it's completely melted...do 30 second bursts at 50% power...you want it to melt...but not to boil!...




once it's all melted...you'll want to spritz with rubbing alcohol...this takes the bubbles out of the soap...


add a couple of drops of colorant...a little goes a long way!...i tend to do a drop or two...stir...and decide if i like what i'm seeing...if not...add a drop more...




then add your fragrance oil...the amount is up to you and your sniffer!...make sure to stir!...




spritz again with the rubbing alcohol...keep on going until you don't see hardly any white bubbles...





pour slowly into your mold...





see all those nasty bubbles?...gotta get rid of 'em...




once again...spritz with your alcohol until it's pretty much bubbleless...is that even a word?...lol...




after you've filled all the popsicle slots that you want to...put the cover on...note...if you're wanting to do multiple flavors scents...you gotta act kinda quick...you can't have the soap setting up before you get the popsicle sticks in there!...




now...take the binder clips...and put on the popsicle sticks...i do this so that the sticks don't get lost when you put them in the mold...


insert all the sticks into the slots of where you've poured the soap...see how the binder clips just rest on top?...now...just leave it be!...it's going to take about an hour to set up!...




remove the binder clips from the sticks...then lift the top off...just slighty jiggle the stick...if it still moves....it's not set completely!...give it a little bit more time...


now...this might be the most difficult part of this project...getting 'em out of the mold!...it's tough!...anywho...you'll want to pry the sides of the mold from the soap at the top...this will start little air pockets...


you'll keep squeezing all around the mold...if you notice...there's little areas that you can see a color difference...this is because the soap has pulled away from the mold...you want to keep going until there's that difference in color everywhere...


starting pushing from the bottom...put a little muscle into it!...lol...eventually the soap will pop up a bit...


grab the stick and slide on out...


you'll want to air them out a bit...just in case there's condensation on the soap...i do this by just grabbing a piece of styrofoam and putting the stick in there...you'll want to let 'em hang out for a while...this makes it so much easier to put in the baggies!....


if you want your soap to look like it has a bite mark...you'll need to get a tiny little scalloped circle cutter...or...you could just take a nibble!...lol...


right on the corner...use the cutter...see...looks like little bucker marks!...


take your baggies and plop 'em in!...


twistie tie 'em up!...add a ribbon, label, or anything else you want!...


now...the one i just did was fruit punch flavored scented...but take another looksie at all the ones you can do up!...now of course...it's totally up to you whether or not you want to tell the kiddies it's soap....you can just let 'em find out for themselves!...lol...enjoy!...

16 comments:

  1. SO cute!! What a great gift/favor idea this could be. My husband will kill me if I start another crafting item but I might have to give these a try!

    ReplyDelete
  2. thanks so much for the feature!...it's been a blast!...

    http://thegreenbeanscrafterole.blogspot.com/

    ReplyDelete
  3. This is so cute!!! Thanks so much for sharing!

    Nicole

    ReplyDelete
  4. Soooooo Cute, these would make great gifts!

    ReplyDelete
  5. What a great tutorial. They are dang cute!

    ReplyDelete
  6. These are sooo cute!!! Thanks for sharing. :)

    ReplyDelete
  7. These are adorable. TFS!

    ReplyDelete
  8. These are fantastic! I love love love them!

    ReplyDelete
  9. 快樂與滿足的秘訣,就在全心全意投注於現在的每一分,每一秒上..................................................

    ReplyDelete
  10. Very cute. Love it! I linked this post to my Monday Morning Favorites. Hope you don't mind.

    http://longwaitforisabella.blogspot.com/2010/07/monday-morning-favorites_26.html

    Blessings!

    ReplyDelete
  11. these are so cool! I love how there is a "bite" cut out of them, the colors are beautiful too!

    ReplyDelete
  12. Linked this tutorial to craft project ideas for popsicle sticks in: http://www.squidoo.com/popsiclesticks Hope it's OK. If not, let me know and I'll remove the link. BTW, love the tutorial!

    ReplyDelete
  13. These are so CUTE! What a fun gift idea! Thanks for sharing!

    ReplyDelete
  14. I love this! It looks edible. So cute :) Thanks for sharing!!!

    ReplyDelete
  15. These are unbelievably adorable! I've got to make them! Just a couple questions -- can you add the scent before you pour the soap into the molds? Would spraying the molds with Pam make it easier to get them out or would that screw the whole thing up?

    ReplyDelete